Specifications, compatibility and ordering information
12-Fiber SC UPC Pigtail Set for Multi-Fiber Termination
This 12-Fiber SC UPC Single-Mode Fiber Pigtail Set contains twelve individually color-coded fibers for fusion splicing and fiber termination. Each fiber is factory terminated with an SC/UPC connector on one end, with the opposite end left as bare fiber for splicing.
The 12-color identification makes individual fibers easier to trace during installation and maintenance. The set is commonly used in optical distribution frames, patch panels, fiber termination boxes and telecom access networks where multiple single-mode fibers need to be terminated at the same point.
Key Features
- 12 individually color-coded single-mode fibers
- SC/UPC connectors factory terminated on one end
- Bare fiber ends for fusion splicing
- Color-coded fibers for easier identification during installation
- Insertion loss ≤0.2 dB
- Multiple lengths and fiber diameters available
- Factory terminated and tested before delivery
Specifications
| Parameter | Specification |
|---|---|
| Product Type | 12-Fiber Pigtail Set |
| Connector | SC/UPC |
| Opposite End | Bare Fiber |
| Fiber Type | Single-Mode |
| Fiber Count | 12 Fibers |
| Polish Type | UPC |
| Fiber Identification | Individually Color-Coded |
| Insertion Loss | ≤0.2 dB |
| Return Loss | >35 dB |
| Operating Wavelength | 1310/1550 nm |
| Available Diameter | 0.9 mm, 2.0 mm or 3.0 mm |
| Operating Temperature | -40°C to +55°C |
| Available Lengths | 0.5 m, 1 m, 2 m, 3 m or 5 m |
Applications
- Optical distribution frames
- Fiber optic patch panels
- Fiber termination boxes
- Telecommunication access networks
- FTTx and optical distribution systems
- Equipment room fiber termination
Ordering and Configuration
This pigtail set is intended for installations where multiple single-mode fibers are spliced and terminated in the same distribution or termination enclosure. Factory-installed SC/UPC connectors reduce on-site connector termination, while the color-coded fibers allow each channel to be identified during splicing, testing and maintenance.
Standard lengths include 0.5 m, 1 m, 2 m, 3 m and 5 m, with 0.9 mm, 2.0 mm and 3.0 mm diameters available. For quotation, specify the required length, fiber diameter, quantity and any project-specific termination requirements.
