Specifications, compatibility and ordering information
The 1x8 SC/UPC ABS Box PLC Fiber Splitter provides one optical input and eight output connections in a protected module format for fiber distribution projects. The PLC splitter is housed inside a compact ABS enclosure, with external fiber leads providing access to the input and output channels. This configuration is commonly used where a preassembled 1x8 splitting point needs to be installed inside a fiber distribution box, cabinet, enclosure or other protected network location without using a larger rack-mounted splitter assembly.
For project installation, the splitter should be matched to both the optical design and the available enclosure space. In addition to the 1x8 split configuration and SC/UPC interface, the input and output pigtail construction, fiber type, pigtail diameter and pigtail length can affect routing inside the distribution hardware. The required optical performance should also be defined according to the project specification rather than assumed from the package type alone. This is especially important when several splitters will be installed across repeated cabinets, access points or distribution locations using the same layout.
For bulk and project orders, the approved configuration should define the split ratio, connector interface, fiber type, input and output pigtail construction, pigtail length and required optical performance before production. Once these items are confirmed, they should remain consistent across the batch so the supplied splitters follow the same installation and connection requirements. A fixed configuration also provides a clearer reference for quotation, project delivery and repeat orders when additional units are required later.
1x8 SC/UPC ABS Box PLC Fiber Splitter Specifications
Confirm the connector interface, fiber and pigtail configuration together with the required optical performance before quotation, particularly when multiple splitters will use the same project specification.
| Parameter | Specification |
|---|---|
| Product Type | PLC Fiber Splitter |
| Split Configuration | 1x8 |
| Input Ports | 1 |
| Output Ports | 8 |
| Package Type | ABS Box |
| Connector Interface | SC/UPC |
| Fiber Mode | Single-Mode |
| Splitter Arrangement | 1 Input to 8 Outputs |
| Pigtail Configuration | Input and Output Fiber Leads |
| Pigtail Diameter | Confirm Before Order |
| Pigtail Length | Confirm Before Order |
| Optical Performance | Confirm Required Grade Before Order |
This 1x8 ABS box splitter is intended for projects that require a defined splitting point inside protected fiber distribution hardware. For quantity orders, provide the required connector interface, fiber and pigtail specification, optical performance requirements and order quantity so the same approved configuration can be maintained across the batch.
